Joseph’s 60Ah SCiB Twin 20K Nissan Pulsar Build
A 60Ah Evolution Lithium SCiB LTO bank, two Sound Digital 20K amplifiers and three DD9915 subwoofers in Joseph George’s Nissan Pulsar. His reported best result is 157.7 dB.
Inside Joseph’s 60Ah SCiB SPL Build
The bank, monitoring hardware, alternator and in-car voltage display are all part of the electrical system supporting this twin-20K Nissan Pulsar build.
Joseph’s Nissan Pulsar Electrical Setup
60Ah of SCiB Support for Twin 20K Amplifiers
At this level, a battery bank is only one part of the electrical system. Alternator output, measured charging voltage, cable size, fusing, grounding, installation and operating time all determine the real result.
- 3Ah Toshiba SCiB cells are rated by Evolution Lithium at 40C continuous and 75C burst.
- 60Ah × 40C = 2,400A calculated design-current capability before installation and charging-system limits are considered.
- Cell-level and in-car voltage displays give useful visibility across the operating range.
- Correct conductor sizing, protection and secure mounting remain essential.
Built for the Long Term
Joseph has been involved in car audio for more than 30 years and shared this feedback once the project was ready to go.
“Thanks for your help bro after the last couple of months it’s finally here and is ready to go. I wish you all the best in the years to come and spread your business across here and the rest of the world.”— Joseph George, Google review
Shop the 60Ah SCiB Bank
60Ah SCiB LTO Battery Bank
Finished 6S bank built with genuine 3Ah Toshiba SCiB cells. The product link opens the 60Ah variation used in Joseph’s Nissan Pulsar build.
Nominal bank voltage: 14.4V · Preferred charging region: approximately 15.6–15.9V · Absolute maximum: 16.8V.
Size the Electrical System Around Your Goal
Send your vehicle, amplifier RMS, alternator output, measured charging voltage, cable layout and intended use. We can help assess a suitable bank and charging strategy for daily, demo or SPL operation.